We manufacture instruments for the following requirements:
|
|||||
Measuring | Bone grinding | Repositioning | Others | ||
Symbol legend :
HUMAN MEDICINE | VETERINARY MEDICINE | DIMENSIONING |
Sterilizable |
Download Measures (PDF) |
|
Parallel Pliers 30-01-18-1602 Parallel closing forceps, hardened jaws, geared and one side with V-Nut. Completely rustfree and blasted with glass perls. |
Special models are fabricable according to customer's specifications.
!! With side cutter for easy cutting of wires !! |
|
Download Measures (PDF) |
|
Parallel Pliers with side cutter 30-03-18-2401 Parallel closing forceps. Hardened jaws, geared and one side with V-Nut. Completely rustfree and blasted with glass perls. |
____________________________________________________________________________________
The instruments need a special screw for the usage of a Extraction hammer. The article numbers in brackets correspond to the versions of a Extraction hammer. |
|
Download Measures (PDF) |
|
Locking Pliers (30-01-18-1604) Length 20cm: 30-01-20-1601 (30-01-20-1605) Length 24cm: 30-01-24-1601 (30-01-24-1603) |
____________________________________________________________________________________
The instruments need a special screw for the usage with a Extraction hammer. The article numbers in brackets correspond to the versions of a Extraction hammer. |
|
Download Measures (PDF) |
|
Needle Nosed Locking Pliers Length 22cm: 30-01-22-1601 (30-01-22-1602)Length 25cm: 30-01-25-1601 (30-01-25-1602) Length 30cm: 30-01-30-1601 (30-01-30-1605) |
____________________________________________________________________________________
Both jaws lay parallel in full length at the wire, while contributing a 5 mm rod. |
|
Download Measures (PDF) |
|
Needle Nosed Locking Pliers Parallel jaws at distance 5 mm Length 30cm: 30-01-30-1607 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Length 19cm: 30-01-20-1811 |
____________________________________________________________________________________
Extraction hammer for deflecting wires, nails and pins axially parallel. Possible Versions: Locking plier - combinations: 30-01-18-1604 + 30-01-35-1601 = Order.No: 30-01-36-1601 30-01-20-1605 + 30-01-35-1601 = Order.No: 30-01-41-1601 30-01-24-1603 + 30-01-40-1601 = Order.No: 30-01-47-1601 Needle nosed locking plier combination: 30-01-22-1602 + 30-01-35-1601 = Order.No: 30-01-40-1602 30-01-25-1602 + 30-01-35-1601 = Order.No: 30-01-45-1601 30-01-30-1605 + 30-01-40-1601 = Order.No: 30-01-51-1601 |
|
Download Measures (PDF) |
|
Extraction hammer 400 grams: 30-01-35-1601 700 grams: 30-01-40-1601 |
____________________________________________________________________________________
NEW since 2012! Multiple adjustable Vise Grip Plier, completely stainless, for universal use |
Download Measures (PDF) |
Adjustable Vise Grip Plier Length 25cm 30-01-25-1806 Length 30cm 30-01-30-1803 |
____________________________________________________________________________________
Break-off forceps for removing the thread wings on pedicle screws.
|
|
Download Measures (PDF) |
|
Break-off forceps Length 23cm: 30-01-23-0100 |
____________________________________________________________________________________
Types of models: You can find the multiplicity of this versions by clicking the "Download Measures (PDF)" button. |
|
Download Measures (PDF) |
|
Rod Gripper Holding forceps For rods in different design deliverable. |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper with releasing lever. Length 26cm 30-01-24-1800 |
___________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model, straight For rods with Ø 6,0 mm/Ø 3,0 mm Length 28cm: 30-01-28-1801 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model, straight For rods with Ø 6,0 mm Length 28cm: 30-01-28-1806 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model, straight For rods with Ø 6,0 mm Length 28cm: 30-01-28-1802 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model, angulated For rods with Ø 6,0 mm Length 28cm: 30-01-28-1803 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model, angulated For rods with Ø 6,35 mm Length 28cm: 30-01-28-1804 |
____________________________________________________________________________________
Barrier in protected version, solvable by releasing lever. Slight version |
|
Download Measures(PDF) |
|
Rod Gripper, medium-heavy model. For rods Ø6,0 -6,35mm Glazed holding spaces Length 30cm: 30-01-30-1800 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model For rods Ø 6,0 - 6,35 mm Glazed holding spacesLength 30cm: 30-01-30-1602 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model For rods Ø 6,0-6,35 mm Serrated holding spaces Length 30cm: 30-01-30-1603 |
____________________________________________________________________________________
With releasing lever |
|
Download Measures (PDF) |
|
Rod Gripper, heavy model For rods Ø 6,0-6,35 mm Serrated holding spaces Length 30cm: 30-01-24-1807 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, light model Length 25cm: 30-01-25-1604 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, straight, 19cm For rods Ø4,5mm : 52-01-19-1600 For rods Ø6,0mm : 52-01-19-1601 For rods Ø5,0mm : 52-01-19-1602 For rods Ø5,8mm : 52-01-19-1603 For rods Ø3,3mm : 52-01-19-1604 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Pin Driver For wires of 0,8 up to 1,6 mm 30-01-14-2601 Turning wires in, bending and extracting, all with one instrument |
Habile |
Bending off the wires |
depth scale |
Clamping range adjustable |
____________________________________________________________________________________
For pulling out K-Wires and Nails of Ø2,8-3,2mm |
|
Download Measures (PDF) |
|
Pin Puller 3,2mm Length 14cm: 13-01-14-1600 |
____________________________________________________________________________________
For pulling out K-Wires and Nails of Ø1,2-1,4mm or rather 3,2mm |
|
Download Measures (PDF) |
|
Pin Puller 1,4mm Length 14cm: 13-01-14-1802 Pin Puller 3,2mm Length 14cm: 13-01-32-1801 |
____________________________________________________________________________________
For pulling K-Wires up to Ø2,0mm |
|
Download Measures (PDF) |
|
Flat Nose Pliers, acuate Length 14cm: 30-01-14-1604 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Wire Bending and Cutting Pliers For Cerclage wires up to Ø1,5mm: Length 16,5cm: 30-03-17-1600 |
____________________________________________________________________________________
For twirling and bending Cerclage wires up to Ø2,0mm |
|
Download Measures (PDF) |
|
Flat nose Pliers, acuate Length 15cm: 30-01-15-1600
|
____________________________________________________________________________________
Download Measures (PDF) |
|
Flat Nose K-Wire Pliers Length 18cm: 30-01-17-1800 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Flat Nose K-Wire Pliers with longitudinal and crossnut Length 18cm: 30-01-17-1801 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Reduction Forceps Length 14cm : 30-07-14-1600 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Farabeuf-Lambotte Bone Holding Forceps Small 20cm : 30-01-20-1810 Large 25cm : 30-01-25-1835 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rib contractor Length 14cm : 52-11-14-1600 Length 16cm : 52-11-16-1600 Length 20cm : 52-11-20-1600 |
____________________________________________________________________________________
Wire twister for twirling and cutting wires up to Ø 0,8-1,2 mm. |
|
Download Measures (PDF) |
|
Wire twister Length 25cm: 30-01-25-1800 |
____________________________________________________________________________________
For easy and safe twirling of Cerclage wires up to Ø 1,5 mm. Clamping, twirling and trimming in one pass. |
|
Download Measures (PDF) |
|
Wire twister "Loute" Length 22cm: 30-01-22-1803 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Wire twister Length 24,5cm: 30-01-23-1604 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Wire twister Length 14cm: 30-01-00-1601 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Wire passer Small Ø45mm : 30-01-00-1602 Large Ø70mm : 30-01-00-1603 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Wire passer, inserter tool Small Ø45mm : 30-01-22-1612 Large Ø70mm : 30-01-24-1613 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Kirschner Extension Bow Small 14,5cm: 13-01-15-1800 Medium 19cm: 13-01-20-1800 Large 24cm: 13-01-25-1800
High quality model. Screwed, not rivetted. Bearing inside. Including 3 Hooks Maximum openings: 12,5cm/21,5cm/25,0cm
|
____________________________________________________________________________________
Download Measures (PDF) |
|
Wire tightener, Ilizarov Length 26cm: 30-08-26-1801 For wires Ø1,8 -2,3mm, Tensile stress up to 125Kg |
____________________________________________________________________________________
Download Measures (PDF) |
|
Screw Holding Forceps For screws 1,5-2,7mm : Length 9cm: 30-01-09-2400 For screws 3,5-6,5mm : Length 9cm: 30-01-09-2401
|
____________________________________________________________________________________
Picture in process | |
Download Measures (PDF) |
|
Holding clip for plates For plates 3,5mm : 52-01-03-2000 For plates 2,7mm : 52-01-03-2001 For plates 2,0mm : 52-01-03-2002 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Articulated Tension Device, Span 20mm Surface matted : Length 9cm: 30-07-09-1801 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Socket Wrench with joint Length 17cm: 30-06-17-1600 |
____________________________________________________________________________________
We use for our Bolt Cutter cutting jaws, made of the strongest rustfree material. Bursts like with tungsten carbide are not possible. A special innovation makes it possible to cut nearly 30% easyer as with normal Bolt Cutters. The handles are quickly removable for sterilisation. |
|
Download Measures (PDF) |
|
Bolt Cutter For rods up to Ø6,35mm with removeable handles : Length 57cm: 11-03-57-1804 with compact handles : Length 57cm: 11-03-57-1805 with short handles : Length 47cm: 11-03-47-1800 |
____________________________________________________________________________________
Download Measures (PDF) | |
Jaws, separately for other models 11-03-12-1801 Download (PDF) 11-03-12-1803 Download (PDF) 11-03-13-1800 Download (PDF) 11-03-13-1801 Download (PDF) 11-03-13-1802 Download (PDF) |
____________________________________________________________________________________
Download Measures (PDF) |
|
Pin Cutter For rods up to Ø3,2mm: Length 26cm: 11-03-26-1801 For rods up to Ø4,7mm: Length 38cm: 11-03-38-1801 |
____________________________________________________________________________________
Download Measures(PDF) |
|
Pin Cutter "Diamond" For rods up to Ø1,6mm: Length 16cm: 11-03-16-1801 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Wire Bending and Cutting Pliers For Cerclage wires up to Ø1,5mm: Length 16,5cm: 30-03-17-1600 |
____________________________________________________________________________________
!! With side cutter for easy cutting of wires !! |
|
Download Measures (PDF) |
|
Parallel Pliers with side cutter For wires up to Ø 1,6 mm 30-03-18-2401 Parallel closing forceps. Hardened jaws, geared and one side with V-Nut. Completely rustfree and blasted with glass perls. |
____________________________________________________________________________________
Download Measures(PDF) |
|
Front Cutter For Cerclage wires up to Ø2,0mm Length 23cm: 11-03-23-1806
|
____________________________________________________________________________________
Download Measures (PDF) |
|
Plate Cutting Forceps For Plates up to 1,0mm: Length 23cm: 11-03-23-1800 |
____________________________________________________________________________________
Download Maße (PDF) |
|
Cable Cutter For steel cables up to Ø2,0mm: Length 18cm: 30-03-18-1600
|
____________________________________________________________________________________
Download Measuring (PDF) |
|
Rod Bender, Length 28cm Universal up to 7mm: 30-02-28-2401 For 5,5mm rods : 30-02-28-2402 For 6mm rods : 30-02-28-2403 For 6,5mm rods : 30-02-28-2100 |
____________________________________________________________________________________
Download Measuring (PDF) |
|
Rod Bender, Length 28cm Universal up to 7mm: 32-02-28-1800 |
____________________________________________________________________________________
Download Measuring (PDF) |
|
Rod Bender, Length 35cm Universal up to 7mm: 30-02-35-2400 For 5,5mm rods : 30-02-35-2402 For 6,35mm rods : 30-02-35-2401 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Bender, Length 66cm Removeable handles Universal up to 7mm: 30-02-66-2400 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Bender, Length 20cm For rods Ø3+4mm, Bending radius large: 30-02-18-1801 For rods Ø3+4mm, Bending radius small : 30-02-18-1802 |
____________________________________________________________________________________
Insert by pairs, right and left model |
|
Download Measures (PDF) |
|
In Situ Bender For 4,8mm rods Length 33cm,Right : 30-02-33-1800 Length 33cm,Left : 30-02-33-1801 |
____________________________________________________________________________________
Insert by pairs, right and left model |
|
Download Measures (PDF) |
|
In Situ Bender For 6.3mm rods Length 30cm,Right:30-02-30-1801 Length 30cm,Left: 30-02-30-1802
For 6.5mm rods Length 33cm,Right:30-02-33-1802 Length 33cm,Left:30-02-33-1803 |
____________________________________________________________________________________
Download Measures (PDF) |
|
In Situ Bender For 5,5mm rods Length 32cm,Left: 30-02-32-1800 Length 32cm,Right:30-02-32-1801 |
____________________________________________________________________________________
Download Measures (PDF) |
|
In Situ Bender For 6,4mm rods Length 32cm,Left: 30-02-32-1802 Length 32cm,Right:30-02-32-1803 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Wire and Pin Bender For wires 2,0 and 3,2mm Length 15cm : 30-02-15-1601 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bending Iron For Ø1,6 and Ø2,0mm wires 30-02-00-1600 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bending Iron 30-02-00-1601 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bending Pliers Length 13cm : 30-02-13-1600 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bending Pliers Length 20cm, up to 1,6mm thickness 30-02-20-1601 Length 24cm, up to 3,0mm thickness 30-02-24-1601 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Biegezange für Platten Length 22cm, up to 1,6mm thickness 30-02-22-1601 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bending Pliers Length 28 cm, up to 3,2mm thickness 30-02-28-1601 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Plate Bending Forcept For Plates with a thickness of 10 and 12mm Length 26cm : 30-02-26-1601 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bending Iron, Length 20cm For Plates 2,7 + 3,5mm 30-02-19-1603 For Plates 3,5 + 4,5mm 30-02-19-1601 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bending Irond for Standard Plates and rods Length 24cm: 30-02-24-1603 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bending Iron for small Plates Length 14cm: 30-02-14-1604 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bending Iron for small Plates Length 14cm: 30-02-14-1603 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bending Iron for small Plates, easy Length 14cm: 30-02-14-1602 |
____________________________________________________________________________________
Anvil and hammer will be manufactured like customer's specfications. Alternatively, we construct the corresponding jaws for your plates. |
|
Download Measures (PDF) |
|
Plate Bending Forceps, blank Length 26cm: 30-02-26-1810 |
____________________________________________________________________________________
The Plates are hardened, polished and with broken edges. The lower Plate is removabe. The bending lever arrests in upper and lower position. Base body is made of stainless steel, Base Plate is made of aluminium The Plates are customized deliverable. Please ask! |
|
Download Measures (PDF) |
|
Bending Press For Plates up to 6mm Length 43cm : 30-02-43-0101 |
____________________________________________________________________________________
The plates are hardened, polished and with broken edges. It's nearly completely decomposable. The main body is made of stainless steel and the base plate is made of aluminium. The plates are customized deliverable. Please ask! |
|
Download Measures (PDF) |
|
Bending Press For Plates up to 3,2mm Length 30cm : 30-02-30-0101
|
____________________________________________________________________________________
Picture in process |
|
Download Measures (PDF) |
|
Plate Bending Plier with Vario Pin Length 12cm : 30-02-12-1601 |
____________________________________________________________________________________
Insert by pairs. |
|
Download Measures (PDF) |
|
Plate Bending Plier with Pin Length 17cm: 30-02-17-1601 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Plate Bending Plier with Pin Length 17cm: 30-02-17-1603 |
____________________________________________________________________________________
Insert by pairs. |
|
Download Measures (PDF) |
|
Plate Bending Plier with Pin Length 17cm: 30-02-17-1801 |
____________________________________________________________________________________
Models in different versions. Click the button "Download Measures" to find the corresponding drawings. |
|
Download Measures (PDF) |
|
Depth gauge snapped front part Scale 0-30mm: 13-04-12-1801 Scale 0-50mm: 13-04-17-1800 Scale 0-50mm: 13-04-19-1801 (long centre sleeve) Scale 0-80mm: 13-04-22-1600 |
____________________________________________________________________________________
View 13-04-14-1800, with protection sleeve
View 13-04-14-1800 demounted View 13-04-28-1600 Models in different versions. Click the button "Download Measures" to find the corresponding drawings. |
|
Download Measures (PDF) |
|
Depth gauge screwed front part Scale 0-30mm : 13-04-14-1800 Scale 0-70mm : 13-04-20-1800 Scale 0-120mm : 13-04-28-1600
|
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Ruler bored for the diameter Scale 0-150mm : 13-04-15-1600 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Ruler Scale 0-150mm : 13-04-15-1601 |
____________________________________________________________________________________
Picture in process
|
|
Download Measures (PDF) |
|
Measuring Gauge DHS made of steel, rustfree and antimagnetic Scale 0-140mm : 13-04-21-1600 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bone mill, without cutting barrel(please order separately!) without flex-hand 52-03-42-2401 with flex-hand 52-03-42-2401 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Cutting Barrel for the Bone Mill Ø3mm bore : 52-03-05-1801 Ø4mm bore : 52-03-04-1801 Ø5mm bore : 52-03-05-1802 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Flex-hand for the Bone Mill including fixing screws 42-01-00-1601 |
____________________________________________________________________________________
Bone scraper for breaking pieces of bones. They won't be pulverized but they will be cutted in slices with exchangeable cutting knifes. This ones can be cutted in smaller parts at discretion. In this apparat accrues no bone mush and the bone profit will be nearly 100 %. The apparat is very easy to handle as like as disassembled and assembled without helping tools in secounds. A integrated spill box catches the goods. |
|
Download Measures (PDF) |
|
Bone Scraper including cutting knife 1,0 ; 1,5 and 2,0mm Length 28cm: 52-03-28-1601
DBGM 200 00 516 2 |
____________________________________________________________________________________
Upper and lower cutting plate, made of titanium. Possibility for disassembling for easy cleaning |
|
Download Measures (PDF) |
|
Bone Mill hand-tool For minor spill requirements Length 18cm : 52-03-18-1600 |
____________________________________________________________________________________
You can easily adjust without disassembling with the help of a progradation mechanic and it will be fixed in both ways (distraction and compression). |
|
Download Measures (PDF) |
|
Pelvic Reduction Forceps Length 34cm: 30-01-34-1801 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Spiked disc Ø25mm : 30-02-25-1800-01 |
____________________________________________________________________________________
Picture in process | |
Download Measures (PDF) |
|
Handle for Spiked disc Length xxcm : xx-xx-xx-xxxx |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bone Lever Length 16cm: 16-07-16-1600 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bone Lever Length 16cm: 16-07-16-1802 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bone Lever Hohmann, small Length 23cm: 16-07-23-1800 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bone Lever Hohlmann, wide Length 16cm: 16-07-25-1802 |
____________________________________________________________________________________
Download Maße (PDF) |
|
swallow Length 34cm: 16-07-33-1800 |
____________________________________________________________________________________
|
|
Download Maße (PDF) |
|
Easy-Rider Length 29cm: 16-07-39-1800 |
____________________________________________________________________________________
INSTRUMENTS FOR SPINE OPERATIONS
|
|
Download Measures (PDF) |
|
Distractor Length 19cm: 52-09-19-1802 |
____________________________________________________________________________________
go up[nbsp]
Compressor, short version. For rods up to 3,2mm |
|
Download Measures (PDF) |
|
Compressor Length 19cm: 52-09-19-1803 |
____________________________________________________________________________________
Compressor for rods 6,35mm |
|
Download Measures (PDF) |
|
Compressor Length 31cm: 52-09-31-1801 |
____________________________________________________________________________________
Distractor for rods 6,35mm |
|
Download Measures (PDF) |
|
Distractor Length 31cm: 52-09-31-1800 |
____________________________________________________________________________________
Compressor for rods up to 3,5mm |
|
Download Measures (PDF) |
|
Compressor Length 31cm: 52-09-31-1809 |
____________________________________________________________________________________
Compressor for rods up to 3,5mm |
|
Download Measures (PDF) |
|
Distractor Length 31cm: 52-09-31-1808 |
____________________________________________________________________________________
Break-off forceps for removing the thread wings on pedicle screws.
|
|
Download Measures (PDF) |
|
Break-off forceps Length 23cm : 30-01-23-0100 |
____________________________________________________________________________________
Types of models : You can find the multiplicity of this versions by clicking the "Download Measures (PDF)" button. |
|
Download Measures (PDF) |
|
Rod Gripper Holding forceps for rods in different design deliverable. |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper with releasing lever Length 26cm : 30-01-24-1800 |
___________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model, straight, for rods with Ø6,0mm Length 28cm: 30-01-28-1801 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model, straight, for rods with Ø3,0mm Length 28cm: 30-01-28-1806 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model, straight, for rods with Ø6,0mm Length 28cm: 30-01-28-1802 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model, angulated, for rods with Ø6,0mm Length 28cm: 30-01-28-1803 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model, angulated, for rods with Ø6,35mm Length 28cm: 30-01-28-1804 |
____________________________________________________________________________________
Barrier in protected version, solvable by releasing lever. Slight version |
|
Download Measures (PDF) |
|
Rod Gripper, medium-heavy model. For rods Ø6,0 -6,35mm Glazed holding spaces Length 30cm: 30-01-30-1800 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model For rods Ø6,0 -6,35mm Glazed holding spaces Length 30cm: 30-01-30-1602 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, heavy model For rods Ø6,0 -6,35mm Serrated holding spaces Length 30cm : 30-01-30-1603 |
____________________________________________________________________________________
With releasing lever |
|
Download Measures (PDF) |
|
Rod Gripper, heavy model For rods Ø6,0 -6,35mm Serrated holding spaces Length 30cm: 30-01-24-1807 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, light model Length 25cm : 30-01-25-1604 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Gripper, straight, 19cm for rods Ø4,5mm : 52-01-19-1600 for rods Ø6,0mm : 52-01-19-1601 for rods Ø5,0mm : 52-01-19-1602 for rods Ø5,8mm : 52-01-19-1603 for rods Ø3,3mm : 52-01-19-1604 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Bender, Length 28cm Universal up to 7mm: 30-02-28-2401 For 5,5mm rods : 30-02-28-2402 For 6mm rods : 30-02-28-2403 For 6,5mm rods : 30-02-28-2100 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Bender, Length 35cm Universal up to 7mm: 30-02-35-2400 For 5,5mm rods : 30-02-35-2402 For 6,35mm rods : 30-02-35-2401 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Bender, Length 66cm Removable handles Universal up to 7mm: 30-02-66-2400 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Rod Bender, Length 20cm For rods Ø3+4mm, Bending radius large : 30-02-18-1801 For rods Ø3+4mm, Bending radius small : 30-02-18-1802 |
____________________________________________________________________________________
Insert by pairs, right and left model |
|
Download Measures (PDF) |
|
In Situ Bender For rods 4,8mm Length 33cm,Right: 30-02-33-1800 Length 33cm,Left: 30-02-33-1801 |
____________________________________________________________________________________
Insert by pairs, right and left model |
|
Download Measures (PDF) |
|
In Situ Bender For rods 6,4mm Length 30cm,Right: 30-02-30-1801 Length 32cm,Right: 30-02-32-1803 Length 33cm,Right: 30-02-33-1802 Length 30cm,Left: 30-02-30-1802 Length 32cm,Left: 30-02-32-1802 Length 33cm,Left: 30-02-33-1803 |
____________________________________________________________________________________
Download Measures (PDF) |
|
In Situ Bender For rods 5,5mm Length 32cm,Left: 30-02-32-1800 Length 32cm,Right: 30-02-32-1801 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Twist Drill for Caspar System Length 14cm : 30-05-14-1800 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Drill Guide for Caspar System Length 19cm Right : 30-07-19-1601 Left : 30-07-19-1600 |
____________________________________________________________________________________
Picture left model 52-11-10-1600 |
|
Download Measures (PDF) |
|
Caspar Distractor Length 10cm: Left : 52-11-10-1600 Right : 52-11-10-1601 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Caspar screw Length 7cm: 30-05-07-1805 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Holding forcep for Cage, single tip Length 27cm: 52-01-27-1600 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Holding forcep for Cage, double tip Length 27cm: 52-01-27-1601 |
____________________________________________________________________________________
Handle made of silicone |
|
Download Measures (PDF) |
|
T-handle screwdriver with AO connector Length 12cm: 30-06-12-1800 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Screwdriver with AO connector Length 11cm: 30-06-11-1600 Cannulated with Ø2,3mm Length 11cm: 30-06-11-1606 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Screwdriver with AO connector Length 11cm: 30-06-11-1609 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Screwdriver with AO connector Length 11cm: 30-06-11-1605 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
T-Handle with AO connector Length 8,3cm: 30-06-00-1602 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
T-Handle with AO connector Length 11cm: 30-06-09-1808 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Tap Handle for Dental Shaft Length 11cm: 30-06-11-1601 |
____________________________________________________________________________________
-new modell |
|
Download Measures (PDF) |
|
Tap Handle for Dental Shaft Length 11cm: 30-06-11-1601 |
____________________________________________________________________________________
Ball knob turnable |
|
Download Measures (PDF) |
|
Tap Handle for Dental Shaft Length 11cm: 30-06-11-1607 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Socket Wrench Length 20cm : 30-06-20-1803 |
|
|
Download Measures (PDF) |
|
Tube milking roller Length 15cm: 13-19-15-0201 For cleaning tubes |
____________________________________________________________________________________
Plastic- and metalcap are changeable |
|
Download Measures (PDF) |
|
Hammer 500 Grams (Total weight 700 Grams) Length 19cm: 30-01-19-1816 |
____________________________________________________________________________________
In different sizes available |
|
Download Measures (PDF) |
|
Holding Bow for Instruments Length xxcm: 53-07-10-1800 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Bottle Opener Forceps Length 20cm: 13-01-20-1601 |
____________________________________________________________________________________
Download Measures (PDF) |
|
Bottle Opener Forceps heavy model Length 20cm: 13-01-20-1801 |
____________________________________________________________________________________
|
|
Download Measures (PDF) |
|
Raspatory 6mm with silicone handle Length 19cm: 16-03-19-1801
|
____________________________________________________________________________________